Synopses: Home Alarm Systems: Understand the basic composition of the alarm systems, and how each offers functional features that will protect the home.
Home security alarm systems include different variety of security programs for the home. Often, it is not just about the basic sensors that detect intruders. For some homeowners, these home security alarm systems include the alarm monitoring services, the smoke detectors, fire alarm systems, or medical aid and emergency alarms. In essence, all these security systems are placed for use for the benefit of the homeowner’s protection.
To get familiar with the home alarm systems, it would be best for one to start by understanding the most basic terms and parts of the basic home security alarms. These are essentially those used for the detection of intruders and criminals into one’s house. Ideally, by taking the time to review and comprehend the terms, one gets to choose the perfect system they could have for their home.
The Panel
One of the most essential and intricate parts of the best home alarm systems is the panel. Usually, this is the part of the device where the homeowner controls everything that is happening. Some people refer to the panel as as a metal box where circuits and wires are found. This is not accurate. The panel and the Keypad are synonymous. Typically, the metal box also contains battery packs that act as the back-up in cases of blackout. The metal boxes are found near the demarcation point of the telephone lines or where the phone cords generally start.
The Keypad
For the home alarm systems, one usually has this keypad access that is the device that permits the user to key in a number code to arm the security system. This is the Brain of the System. Many refer to this as the panel. Installers for the security monitoring service are usually those that program the alarm. This is the part of the security system that is often confused with the panel. The codes used in the installation will be broken down into three sets; namely, the user code, the master code, and the installer code. The user code is used to turn on or off the system while the master code is also used for the same function, but it is also acts as the number set that will set a program into place. Installer codes are usually those handled by the security company for the setup of the device.
Zone Systems
Creating a distinct setup for each part of the house is made with the use of zones. For example, home alarm systems for the front door can be placed into the first zone while the window alarms will be on Zone Two. Essentially, this is to help, the homeowner or the security company, identify the zones that have been intruded upon. Usually, the zones are in accordance to the preferences of the owner or the agency.
Cellular Monitoring Back-up or Primary
Sending signals through the use of the cellular chip inside the panel, via the cellphone towers, is the newest way for the home alarm systems companies to detect if the alarm is valid or not. There are those systems that have a primary cell connection, and those with a telephone connection, and the cell as a back-up in the case that the telephone line is disconnected by an intruder. With back-ups regular calls will be sent to home-owners telephone number, and if a dial tone is not reached, then the call will be diverted to the cellular phone units. With cell primary home security systems the first call from the monitoring station is to the cellphone. Home security monitoring services will then send alerts to the police dispatch depending on the phone call.
Contact us for a quote and a no-obligation consultation for your home with a consultant or technician.